PerCP-eFluor 710 | Thermo Fisher Scientific

PerCP-eFluor 710 spectra excitation shown as dotted line and emission shown as solid red histogram


4	488	710/50	482	708	(in buffer) 1	flow cytometry

Invitrogen PerCP-eFluor 710 is a blue laser–excitable tandem dye designed for use in flow cytometry applications. It was developed as an optimal choice for the FL3 channel on a blue laser line. It is consistently two to three times brighter than PerCP-Cyanine5.5 when evaluated in clone-to-clone comparison tests on identical samples. Although PerCP-eFluor 710 is slightly red-shifted in its emission compared to PerCP-Cyanine5.5 (710 nm vs. 685 nm), it uses the same filter sets. No change to your instrumentation is needed if you already use PE-Cy5.5 or PerCP-Cy5.5, allowing you to easily add PerCP-eFluor 710 to your multicolor panels.

We offer PerCP-eFluor 710 dye conjugated to a variety of antibodies, proteins, and amplification substrates optimized for cellular labeling and detection.

Search PerCP-eFluor 710 primary antibodies Search PerCP-eFluor 710 secondary antibodies

Additional products

资源

Benefits of PerCP-eFluor 710 dye

Greater mean fluorescence intensity (MFI) as compared to PerCP-Cyanine5.5
Minimizes the need for compensation out of the PE detector
Stable performance when treated with formaldehyde fixation or exposed to ambient light

Experimental data using PerCP-eFluor 710 dye

Flow histogram comparing PerCP-eFluor 710 dye to PerCP-Cyanine5.5 dye

Comparison of staining performance of PerCP-eFluor 710 to PerCP-Cyanine5.5. Mouse splenocytes were stained with CD4 Monoclonal Antibody (RM4-5), PerCP-eFluor 710 (red line) or CD4 Monoclonal Antibody (RM4-5), PerCP-Cyanine5.5 (pink line).

Flow histogram comparing PerCP-eFluor 710 dye before and after aldehyde fixation or extended ambient light exposure

Stability of PerCP-eFluor 710 dye. Human peripheral blood cells (PBMCs) were stained with CD4 Monoclonal Antibody (SK3 (SK-3)), PerCP-eFluor 710 and analyzed immediately (red line). The sample was then divided and either exposed to ambient light for six hours (blue line) or fixed in 2% formaldehyde overnight at 4°C (green line) and analyzed again.

PerCP-eFluor 710 染料仪表板

初始亮度		蓝色激光可激发 PerCP-eFluor 710 串联染料专为流式细胞仪应用而设计。如果您已经使用 PE-Cy5.5 或 PerCP-Cy5.5 ，则无需更换仪器，便可轻松地将 PerCP-eFluor 710 添加到多色面板中。

在缓冲液中的光稳定性