Search

  • 联系我们
  • 货号直购

CTS Compleo Fill and Finish System Specifications

System specifications

The Gibco CTS Compleo Fill and Finish System is a compact, modular benchtop solution that streamlines formulation and filling with intelligent software that automates calculations and helps reduce manual errors. Its functionally closed design helps minimize risks to the quality and safety of cell therapy manufacturing processes.

CTS Compleo instrument specifications

Instrument attribute Description
Input capacity Up to 4 inputs depending on in-process sample allocation
Input volume 10 mL (minimum), 750 mL (maximum)
Flow rate 5–50 mL/min 
Number of outputs 1–10 depending on number of input bags and orientation
Output volume range 0.5 mL to 750 mL per individual dose, varies with type of output
Output volume accuracy 

0.5 mL to 750 mL, ±10%
Volume verification Independent volume checking mechanism, bubble sensors measure the volume transferred based on the volume of fluid pumped
Output container compatibility Compatible with most cryobags and vials; supports connection via luer lock fittings or direct sterile weld to the bag inlet line
In-process sampling Can dispense multiple samples with as little as 0.2 mL per sample
Air removal (burping) Automatic (pre- and / or post-fill) and manual
Operating noise level 65 dBA (typical) to 70 dBA (maximum)

Dimensions (H x W x D)
  • Instrument: 31.5 in. (800 mm) x 11.4 in. (290 mm) at base x 18.0 in. (460 mm)
  • Instrument width if poles fully extended: 17.3 in. max (440 mm)
Weight 55.0 lb (25.0 kg)
Connectivity OPC-UA interface 
Computer Computer system tested by Thermo Fisher Scientific for use with the CTS Compleo system
Protocol Builder software
  • Standard on all instruments, software guides users through the protocol development process
  • Create, modify, optimize, simulate, and save protocols

CTS Ovation Mixer Module specifications

Mixer attribute Description
On/off
  • Controlled by instrument, activated as required during protocol
  • Mechanical push button also enables user to turn the module on and off
Speed 0 to 80 cycles/min, defined within the protocol being performed

CTS Compleo Single-use kit specifications

Kit attribute Description
Gibco CTS Compleo Single-Use Kit 
  • Cat. No. A58165 (5 pack)
  • Includes a 1 L mixing bag with a formulation capacity up to 750 mL
Input capacity Up to 4 inputs depending on in-process sample allocation
Number of outputs 1-10 depending on number of input bags and orientation
Mixing bag material FP-FLEXTM bag, made from a single-layer, 12 mil polyolefin film
Output lines
  • Maximum of 10 output lines, depending on the number of input bags and orientation
  • Line G can dispense multiple in-process samples into connected vessels for user testing 
Kit tubing material DEHP-free PVC
Tube dimensions OD: 0.160 in. (4.0 mm); ID: 0.094 in. (2.4 mm)
Single-use kit sterilization Gamma irradiation
Pump tube material PharmaPure TPE (thermoplastic elastomer) tubing
Air inlet filter 0.2 µm sterile filter, allows sterile air to be drawn into the kit via line A
Luer lock material MABS (methyl methacrylate acrylonitrile butadiene-styrene)
Kit identifier Each kit is individually barcoded, read by the system at the start of the protocol

For Research Use or Manufacturing of Cell, Gene, or Tissue-Based Products.