DynaMag™-96 Side Magnet - FAQs

View additional product information for DynaMag™-96 Side Magnet - FAQs (12331D)

9 product FAQs found

DynaMag-2和DynaMag-Spin磁力架的高斯值是多少?

DynaMag-2磁力架的最低高斯值为3,500–3,700,DynaMag-Spin磁力架最低高斯值为3,000–3,500。

高斯和特斯拉单位的标准换算关系是多少?

1特斯拉等于10,000高斯。

我该如何清洁DynaMag磁力架?

使用以下任意一种清洁剂喷洗和/或擦拭DynaMag磁力架:

•70%异丙醇
•1%次氯酸钠溶液(漂白剂)
•0.1 N HCl溶液

不要将装置浸泡在水溶液中,避免长时间接触于水或其他水溶液。不可将磁力架进行高压灭菌或加热至70°C以上。

DynaMag-2磁力架(货号12321D)和DynaMag-Spin磁力架(货号12320D)有何区别?

DynaMag-2磁力架可容纳16个标准的1.5 mL或2 mL微量离心管,而DynaMag-Spin磁力架最多能容纳6个标准的1.5 mL微量离心管。

What are the Gauss levels for the DynaMag-2 and DynaMag-Spin Magnets?

The DynaMag-2 Magnet is 3,500-3,700 minimum Gauss level and the DynaMag-Spin is 3,000-3,500 minimum Gauss level.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What is the standard conversion of Gauss to Tesla units?

1 Tesla is equivalent to 10,000 Gauss. .

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

What is the difference between the DynaMag-2 Magnet (Cat. No. 12321D) and DynaMag-Spin Magnet (Cat. No. 12320D)?

The DynaMag-2 Magnet can hold 16 standard 1.5 mL or 2 mL microcentrifuge tubes, while the DynaMag-Spin Magnet holds up to 6 standard 1.5 mL microcentrifuge tubes.

How can I clean my DynaMag magnet?

Spray and/or wipe the DynaMag magnet unit with one of the following cleaning agents:

- 70% (v/v) isopropyl alcohol
- 1% (v/v) sodium hypochlorite solution (bleach)
- 0.1 N HCl solution

Do not submerge the magnet unit in aqueous solutions and avoid prolonged exposure to water or aqueous solutions. Clean with a damp cloth and mild detergent when exposed to harsh solvents. Do not autoclave the magnet unit as heating the magnet to above 70 degrees C can destabilize the magnetic material, resulting in loss of magnetic strength.

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.