CellEvent™ 细胞衰老绿色检测试剂盒
Invitrogen17万+抗体限时买二赠一,靶点广,灵活用!
Invitrogen17万+抗体限时买二赠一,靶点广,灵活用!
CellEvent™ 细胞衰老绿色检测试剂盒
Invitrogen™

CellEvent™ 细胞衰老绿色检测试剂盒

CellEvent 细胞衰老绿色检测试剂盒由荧光探针和优化的缓冲液组成,能够进行基于图像的衰老细胞检测。荧光素标记的探针包含两个半乳糖苷部分,使其成为 β-半乳糖苷酶的靶标。β-半乳糖苷酶的激活通常用作衰老细胞的生物标记物。该水解酶位于溶酶体中,并在酸性 pH 值条件下将 β-半乳糖苷转化为单糖。酶切产物由于细胞内蛋白的共价结合而保留在细胞内并发出荧光信号,其最大吸收/发射波长为了解更多信息
Have Questions?
更改视图buttonViewtableView
货号数量
C1085025 μL
C10851100 μL
货号 C10850
价格(CNY)
3,473.00
Each
添加至购物车
数量:
25 μL
价格(CNY)
3,473.00
Each
添加至购物车
CellEvent 细胞衰老绿色检测试剂盒由荧光探针和优化的缓冲液组成,能够进行基于图像的衰老细胞检测。荧光素标记的探针包含两个半乳糖苷部分,使其成为 β-半乳糖苷酶的靶标。β-半乳糖苷酶的激活通常用作衰老细胞的生物标记物。该水解酶位于溶酶体中,并在酸性 pH 值条件下将 β-半乳糖苷转化为单糖。酶切产物由于细胞内蛋白的共价结合而保留在细胞内并发出荧光信号,其最大吸收/发射波长为 490/514 nm。

CellEvent 细胞衰老绿色检测试剂盒的特点包括:
•可靠且快速的衰老细胞荧光检测
• 具有比传统比色 x-gal 更高的灵敏度
• 荧光信号保持良好,可使用标准 Alexa Fluor 488/FITC 滤光片组进行检测
• 支持多通路检测—细胞衰老荧光探针可以进行多通路检测

由于复制寿命有限,正常细胞会进入细胞周期停滞,也称为细胞衰老。在此衰老阶段,细胞保持代谢活性,而不会发生细胞死亡或分裂。它们具有特定的表型,包括出现多个细胞核、空泡形成增多、表达 pH 值依赖性 β-半乳糖苷酶以及外形增大和伸展。细胞衰老可能通过多种机制在肿瘤抑制、肿瘤进展、衰老以及组织修复中发挥作用。

β-半乳糖苷酶的激活通常用作衰老细胞的生物标记物。该水解酶位于溶酶体中,并在酸性 pH 值条件下将 β-半乳糖苷转化为单糖。其活性在溶酶体 pH 值为 4 的条件下较佳,但常规检测通常在 pH 值为 6 时进行测定。研究表明,无论测试使用的 pH 值如何,衰老细胞中的标准化 β-半乳糖苷酶活性均为衰老前细胞的两倍。

β-半乳糖苷酶的比色底物 5-溴-4-氯-3-吲哚基-β-D-吡喃半乳糖苷 (x-gal) 长期以来一直用于在体外检测细胞的代谢活性。然而,由于信号不一致、检测时间长并且无法进行多通路检测,其应用受到限制。

因此,本公司开发了一种可用于检测衰老细胞的灵敏 β-半乳糖苷酶荧光底物。CellEvent 细胞衰老绿色探针是一种基于荧光素的试剂,其中包含两个半乳糖苷部分,使其成为 β-半乳糖苷酶的特异性靶标。酶切产物由于细胞内蛋白的共价结合而保留在细胞内并发出荧光信号,其最大吸收/发射波长为 490/514 nm。

CellEvent 细胞衰老绿色试剂盒可提供 CellEvent 细胞衰老绿色探针以及经过优化的缓冲液,可用于检测固定后样品中的衰老细胞。该探针可以与其他试剂一起进行多通路检测,并且兼容多聚甲醛固定。

仅供科研使用。不可用于诊断程序。
规格
细胞类型哺乳动物细胞
检测方法荧光
产品规格96 孔板
数量25 μL
运输条件经批准可在室温下或置于湿冰上运输
适用于(设备)荧光显微镜, 高内涵分析仪
产品线CellEvent™
产品类型细胞衰老绿色检测试剂盒
Unit SizeEach
内容与储存
在 2–8°C 下避光保存。

常见问题解答 (FAQ)

Which sample types can I use with the CellEvent Senescence Green Detection Kit?

The CellEvent Senescence Green Detection Kit can be used with various sample types, including fixed cells, adherent cells, and tissue sections.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can I use the CellEvent Senescence Green Detection Kit (Cat. Nos. C10850, C10851) on already fixed samples, rather than immediately after fixation?

The CellEvent Senescence Green Detection Kit (C10850) requires fixation for the stain to enter lysosomes. The beta-galactosidase remains active immediately following fixation with paraformaldehyde, so there is a requirement to stain the cells shortly after fixation.

We have not tested fixation and long-term storage. The beta-galactosidase activity could decrease if you wait too long after fixation to stain. Therefore, we do not recommend using the CellEvent Senescence Green Detection Kit on already fixed samples.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can the CellEvent Senescence Green Probe be multiplexed using antibodies for intracellular labeling?

Yes. After incubating the cells with CellEvent Senescence Green Probe, permeabilize the cells, wash, and proceed with detection.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can I use my own buffer with the CellEvent Senescence Green Probe?

We do not recommend using your own buffer with the CellEvent Senescence Green Probe. The assay is pH sensitive and we recommend that you use the buffer provided in the kit be used.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can I use the CellEvent Senescence Green Probe on live cells?

No. It only works on fixed cells; b-galactosidase is still active immediately following fixation with paraformaldehyde.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.