Search
Search
View additional product information for NuPAGE™ MES SDS Running Buffer (20X) - FAQs (NP0002, NP000202)
15 product FAQs found
我们不推荐一起使用NuPAGE Bis-Tris凝胶和无SDS的NuPAGE MOPS或MES上样缓冲液在非变性条件下电泳。这种缓冲液系统会产生过多热量，导致条带分辨率较差。此外，在中性pH环境下，不带电荷的目标蛋白可能不会很好地迁移。
NuPAGE MOPS和MES SDS电泳缓冲液可兼容Edman蛋白质测序。可直接对NuPAGE凝胶上的蛋白质测序。
NuPAGE缓冲液应保存在4–25℃。
•Invitrogen Tris-甘氨酸和InvitrogenTricine小型凝胶：Invitrogen预制胶电泳指南（https://tools.thermofisher.com/content/sfs/manuals/electrophoresisguide_man.pdf），第8页
•NuPAGE Tris-Acetate和NuPAGE Bis-Tris小型凝胶：NuPAGE技术指南（https://tools.thermofisher.com/content/sfs/manuals/nupage_tech_man.pdf），第10页
•Bolt Bis-Tris Plus小型凝胶：点击此处（https://www.thermofisher.com/us/en/home/life-science/protein-expression-and-analysis/protein-gel-electrophoresis/protein-gels/bolt-bis-tris-gels.html）查看
•Thermo Scientific Precise Tris-HEPES凝胶：Precise Tris-HEPES凝胶使用手册（https://tools.thermofisher.com/content/sfs/manuals/MAN0011499_Precise_Protein_Gels_UG.pdf），第1页
•中型凝胶（Invitrogen Tris-甘氨酸、NuPAGE Bis-Tris和NuPAGE Tris-Acetate）：Invitrogen中型凝胶系统使用手册（https://tools.thermofisher.com/content/sfs/manuals/Invitrogen_midigel_man.pdf），第4页
•Thermo Scientific Precise Tris-甘氨酸凝胶：Precise Tris-甘氨酸凝胶使用手册（https://tools.thermofisher.com/content/sfs/manuals/MAN0011814_Precise_TrisGlycine_Gels_UG.pdf），第1页
我们的预制蛋白质凝胶不含SDS，但在使用合适的变性电泳缓冲液时，可在变性条件下电泳。
注意：NuPAGE Bis-Tris凝胶、Bolt Bis-Tris Plus凝胶和Thermo Scientific Precise Tris-HEPES凝胶不可在非变性条件下电泳；这些凝胶只能用于变性条件下。
*Invitrogen Tris-甘氨酸凝胶：非变性电泳时使用Invitrogen Tris-甘氨酸非变性电泳缓冲液 。变性电泳时使用 Invitrogen Tris-甘氨酸SDS电泳缓冲液
*Invitrogen NuPAGE Tris-Acetate凝胶：非变性电泳时使用Invitrogen Tris-甘氨酸非变性电泳缓冲液 。变性电泳时使用 NuPAGE Tris-乙酸SDS电泳缓冲液
*Invitrogen NuPAGE Bis-Tris凝胶：使用NuPAGE MOPS-SDS电泳缓冲液或NuPAGE MES-SDS电泳缓冲液进行变性电泳
*Invitrogen Bolt Bis-Tris Plus凝胶：使用Bolt MOPS SDS电泳缓冲液或Bolt MES SDS电泳缓冲液进行变性电泳
*Thermo Scientific Precise Tris-甘氨酸凝胶：非变性电泳时使用Tris-甘氨酸SDS电泳缓冲液，不加入SDS。变性电泳时使用Tris-甘氨酸SDS电泳缓冲液。
*Thermo Scientific Precise Tris-HEPES凝胶：使用Tris-HEPES SDS电泳缓冲液进行变性电泳。
DTT is not stable, so it must be added and the reduction performed just prior to loading your samples.
Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.
Precipitation of the LDS or SDS at 4 degrees C is normal. Bring the buffer to room temperature and mix until the LDS/SDS goes into solution. If you do not want to wait for it to dissolve, you can store the sample buffer at room temperature.
Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.
While they are both Bis-Tris based gels, the chemistries are very different since Bolt gels are optimized for western blotting. Another key difference is the wedge well design of the Bolt gels, which allows larger sample volumes to be loaded.
Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.
The neutral operating pH of the NuPAGE Gels and buffers provides following advantages over the Laemmli system:
-Longer shelf life of 8-12 months due to improved gel stability
-Improved protein stability during electrophoresis at neutral pH resulting in sharper band resolution and accurate results (Moos et al, 1998)
-Complete reduction of disulfides under mild heating conditions (70 degrees C for 10 min) and absence of cleavage of asp-pro bonds using the NuPAGE LDS Sample buffer (pH > 7.0 at 70 degrees C)
-Reduced state of the proteins maintained during electrophoresis and blotting of the proteins by the NuPAGE Antioxidant
Please refer to the following paper: Moos M Jr, Nguyen NY, Liu TY (1988) Reproducible High Yield Sequencing of Proteins Electrophoretically Separated and Transferred to an Inert Support. J Biol Chem 263:6005-6008.
Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.
Both the NuPAGE MES SDS Running Buffer (20X) (Cat. No. NP0002) and the 20X Bolt MES SDS Running Buffer (Cat. No. B0002) have the exact same composition: 50 mM MES, 50 mM Tris Base, 0.1% SDS, 1 mM EDTA, pH 7.3.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
We do not recommend using NuPAGE Bis-Tris gels with NuPAGE MOPS or MES Running Buffer prepared without SDS for electrophoresis under native conditions. This buffer system may generate excessive heat, resulting in poor band resolution. Further, the protein of interest may not migrate very well in a neutral pH environment if it is not charged.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
The NuPAGE MOPS and MES SDS running buffers are compatible with Edman protein sequencing. Proteins can be sequenced directly from NuPAGE gels.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
NuPAGE buffers can be stored at 4-25 degrees C.
Find additional tips, troubleshooting help, and resources within our Protein Gel 1D Electrophoresis Support Center.
*Tris-Glycine and Invitrogen Tricine Mini gels: see here (http://tools.thermofisher.com/content/sfs/manuals/electrophoresisguide_man.pdf), Page 8
*NuPAGE Tris-Acetate and NuPAGE Bis-Tris Mini gels: see here (http://tools.thermofisher.com/content/sfs/manuals/nupage_tech_man.pdf), Page 10
*Bolt Bis-Tris Plus Mini gels: see here (http://www.thermofisher.com/us/en/home/life-science/protein-biology/protein-gel-electrophoresis/protein-gels/bolt-bis-tris-gels.html)
*Thermo Scientific Precise Tris-HEPES gels: see here (https://tools.thermofisher.com/content/sfs/manuals/MAN0011499_Precise_Protein_Gels_UG.pdf), Page 1
*Midi gels (Invitrogen Tris-Glycine, NuPAGE Bis-Tris and NuPAGE Tris-Acetate): see here (https://assets.thermofisher.com/TFS-Assets/LSG/manuals/novex_midigel_man.pdf), Page 4
*Thermo Scientific Precise Tris-Glycine gels: see here (https://tools.thermofisher.com/content/sfs/manuals/D25MAN0011814_Precise_TrisGlycine_Gels_UG.pdf), Page 1
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.
Our precast protein gels do not contain SDS but they can be run under denaturing conditions when used with the appropriate denaturing running buffer.
Note: NuPAGE Bis-Tris gels, Bolt Bis-Tris Plus gels, and Thermo Scientific Precise Tris-HEPES gels cannot be run under native conditions; they can only be run under denaturing conditions.
*Invitrogen Tris-Glycine gels: For Native electrophoresis, use Invitrogen Tris-Glycine Native Running Buffer. For Denaturing electrophoresis, use Invitrogen Tris-Glycine SDS Running Buffer
*NuPAGE Tris-Acetate gels: For Native electrophoresis, use Invitrogen Tris-Glycine Native Running Buffer. For Denaturing electrophoresis, use NuPAGE Tris-Acetate SDS Running Buffer
*NuPAGE Bis-Tris gels: For Denaturing electrophoresis, use NuPAGE MOPS-SDS Running Buffer or NuPAGE MES-SDS Running Buffer
*Bolt Bis-Tris Plus gels: For Denaturing electrophoresis, use Bolt MOPS SDS Running Buffer or Bolt MES SDS Running Buffer
*Thermo Scientific Precise Tris-Glycine gels: For Native electrophoresis, use Tris-Glycine SDS Running Buffer without SDS added. For Denaturing electrophoresis, use Tris-Glycine SDS Running Buffer.
*Thermo Scientific Precise Tris-HEPES gels: For Denaturing electrophoresis, use Tris-HEPES SDS Running Buffer.
Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.