CID8712D1M Radiation Hardened Solid-State Camera (CCIR)
CID8712D1M Radiation Hardened Solid-State Camera (CCIR)
Thermo Scientific™

CID8712D1M Radiation Hardened Solid-State Camera (CCIR)

Thermo Scientific™ CID8710D1M solid-state, monochrome, CID-based video camera features minimum radiation tolerance of at least 1 x 106 rads total dose gamma (1 MegaRAD™) total dose.
Have Questions?
Catalog NumberTotal Pixels
CID8712D1MCCIR786(H) x 612(V)
Catalog number CID8712D1MCCIR
Price (CNY)
-
Request A Quote
Total Pixels:
786(H) x 612(V)
Thermo Scientific™ CID8710D1M solid-state, monochrome, CID-based video camera features minimum radiation tolerance of at least 1 x 106 rads total dose gamma (1 MegaRAD™) total dose. Camera features a 2:1 interlace-scanned Charge Injection Device (CID) based imager with 11.5 micron square pixels in 768(H) x 612(V) CCIR version format.
Also features superior anti-blooming performance inherent to all CIDs, and command stop motion to capture and read asynchronous high-speed events in center frame. A versatile camera head-mounting feature simplifies installation in small spaces, and the standard “C” mount lens adapter provides back-focus adjustments.
  • Camera is tolerant to gamma, neutron, high energy electrons, and proton radiation
  • Since pixel charge readout is within the CID pixel, there is limited potential of single event disruptions common with other imaging technologies
  • CID structure is inherently radiation resistant, and with specific modifications to the CID process, has been radiation hardened
  • CID cameras allow at least an order of magnitude improvement in operation in radiation environments compared to CCD and CMOS-based cameras
  • Imager is also inherently anti-blooming and tolerant to highly specular lighting overloads
  • Optical overloads are highly contained within each pixel or the immediately surrounding pixels so charge is not shared with adjacent rows or columns
  • Spectral response is from 200nm to 1100nm and coatings are available for X-ray, deep UV and IR
  • CID imagers have a contiguous uniform pixel structure where the total sensor is active with virtually no opaque areas which facilitate interpixel interpolation for subpixel edge definition
  • Compact remote head is easily replaceable and connects to a Camera Control Unit via flexible cable supplied to length
  • Charge Injection Device (CID) Rad Hard Technology
  • 1 x 106 Rad Total Dose (gamma) Excellent Image at 7 x 105 rads/hr High-resolution / small size Replaceable remote head No geometric distortion
  • 1:1 aspect pixels
  • Precise edge detection
  • Selectable 2x, and 0.5 video gain boost

Ordering Alerts:

Cameras are available in RS-170 or Progressive Scan formats upon request. Options include Color and custom versions, with partnered programs for Air or Underwater operation.

Requires:

Requires an external power source supplying +11.5 to +17VDC.

Recommended for:

  • Inspection and measurement
  • Process monitoring
  • Robotic handling
  • Hot cell monitoring
  • Laser beam profiling
  • Research
Specifications
Active Area11 mm (Diagonal)
CCDCCIR, 25 FPS, 2:1 Interlace
CCTVCID
CameraRadiation-Hardened Solid-State CID-Based Video Camera
Charge Injection DeviceRadiation-Hardened Solid-State CID-Based Video Camera
Composite Video1V p-p, terminated into 75ohms
Connector Types(J1) 25 Pin D (Male), (J2) 25 Pin D (Female), (J3) 26 Pin D (Female), (BNC) Standard
DescriptionCID8712D1 M Radiation-Hardened Solid-State CID-Based Video Camera (CCIR)
Detector TypeCID
Displayed Pixels768(H) x 475(V) (RS-170 Mode); 768(H) x 575(V) (CCIR Mode)
Distortion0
Electrical (Scanning Format)CCIR, 25 FPS, 2:1 Interlace
Environmental ConditionsShock: 50 G (1/2 Sinewave (at 10 ms Duration))
Full Well Capacity>250000 Electron
Gainx2, x0.5 (Internally Switch Selectable)
ImagerCID
Inputs(J1) +15 VDC, Composite Sync/H Drive, (J2) V Drive, Inject Inhibit, Frame Reset
Length (Metric) Cable30 m
LevelBlack Level: +50 mV (Auto Black Clamp), White Level: +700 mV, Sync Level: -300 mV
Mounting OptionsLens Mount: Standard C Mount (1.0 in. - 32 Thread); Camera Mount: 1/4 in. - 20 Thread
Noise47 dB
Operating Humidity Range0 to 95%, Non-Condensing
Outputs(J1) Video, End of Frame, End of Line, H and V Drive, Composite Sync, Blanking; (J2) Video, ALC, 14.
Power Consumption1.2 A
SensitivityFull Output at 1.0 fc Faceplate, 0 dB Gain, Illumination (T=2850 K)
Signal To Noise Ratio47 dB
Temperature (English) Operating32°F to 86°F
Temperature (Metric) Operating0°C to 30°C
Total Pixels786(H) x 612(V)
Voltage14.5 to 15.5 VDC
Wattage18 W
Weight (English) CCU33 oz.
Weight (English) Head9.7 oz.
Weight (Metric) CCU0.93 kg
Weight (Metric) Head0.27 kg
Imager (Optical Format)2/3 in.
Pixel Size11.5 x 11.5 μm
Resolution>500 TVL (Horizontal)
Unit SizeEach