磺基-SBED 生物素标记转移试剂,No-Weigh™ 形式
Invitrogen17万+抗体限时买二赠一,靶点广,灵活用!
磺基-SBED 生物素标记转移试剂,No-Weigh™ 形式
Thermo Scientific™

磺基-SBED 生物素标记转移试剂,No-Weigh™ 形式

Thermo Scientific Pierce Sulfo-SBED 生物素标记转移试剂是一种多功能试剂,用于标记纯化蛋白,然后将连接的生物素标签共价转移至该蛋白的特定相互作用体上。Sulfo-SBED 是磺基-N-羟基琥珀酰亚胺-2-(6-[生物素酰氨基]-2-(对-叠氮基苯甲酰氨基)-己酰氨基)乙基-1,3'-二硫代丙酸酯的缩写。它是一种异型双功能化学交联剂,能够一端与伯胺共价连接,另一端与几乎任何蛋白官能团共价连接。与典型交联剂不同,Sulfo-SBED 还包括生物素基团和可切割的二硫化物间隔臂了解更多信息
Have Questions?
更改视图buttonViewtableView
货号数量
A3926010 x 1 mg
3303310 mg
货号 A39260
价格(CNY)
3,511.00
飞享价
Ends: 31-Dec-2025
5,122.00
共减 1,611.00 (31%)
Each
添加至购物车
数量:
10 x 1 mg
价格(CNY)
3,511.00
飞享价
Ends: 31-Dec-2025
5,122.00
共减 1,611.00 (31%)
Each
添加至购物车
Thermo Scientific Pierce Sulfo-SBED 生物素标记转移试剂是一种多功能试剂,用于标记纯化蛋白,然后将连接的生物素标签共价转移至该蛋白的特定相互作用体上。

Sulfo-SBED 是磺基-N-羟基琥珀酰亚胺-2-(6-[生物素酰氨基]-2-(对-叠氮基苯甲酰氨基)-己酰氨基)乙基-1,3'-二硫代丙酸酯的缩写。它是一种异型双功能化学交联剂,能够一端与伯胺共价连接,另一端与几乎任何蛋白官能团共价连接。与典型交联剂不同,Sulfo-SBED 还包括生物素基团和可切割的二硫化物间隔臂。这些特点相结合可使交联剂依次交联相互作用蛋白,并将生物素亲和标记从一种蛋白(即纯化“诱饵”蛋白)转移至另一种蛋白(可能是未知“猎物”蛋白)。标签转移是用于蛋白质相互作用研究的强大体外方法。越来越多的出版物描述使用 Sulfo-SBED 生物素标记转移试剂鉴别先前未知的蛋白相互作用结合配偶体以及更全面地表征其他蛋白相互作用的特定蛋白结合结构域的过程。

标记转移实验的典型方案:

•将几微升溶解的 Sulfo-SBED 试剂加入 0.5-1 mL 纯化诱饵蛋白的 PBS 溶液中。
•在冰上或室温下于暗处孵育混合物 30-120 分钟。
•进行脱盐或透析(在弱光下)以从标记诱饵蛋白中去除过量未反应的 Sulfo-SBED。
•将标记诱饵蛋白添加至细胞裂解物或其他包含假定靶蛋白相互作用体(“猎物”)的溶液中。
•当形成相互作用复合物时,将溶液暴露在紫外光 (365 nm) 下几分钟。
•通过以下几种方法之一分析产品:
Western 印迹:切割 DTT 中的交联,通过 SDS-PAGE 分离蛋白,并通过 Western 印迹法使用辣根过氧化物酶标记的链霉素亲和素检测生物素化条带。
纯化和质谱或测序:胰蛋白酶酶切后对生物素化蛋白或肽片段进行亲和纯化,并进行 MS 或测序以表征相关蛋白。

相关产品
磺基-SBED 生物素标签转移试剂盒 - Western 印迹应用

仅供科研使用。不可用于诊断程序。
规格
化学反应性胺到胺
标记方法化学标记、标记转移
标签或染料生物素
产品类型Sulfo-SBED 生物素标记转移试剂
数量10 x 1 mg
反应一部分NHS 酯、炔烃
运输条件经检验可环境温度或湿冰运输
溶解度DMF (Dimethylformamide), DMSO (Dimethylsulfoxide), Methanol, Water
标签类型生物素和其他半抗原
产品线Pierce
Unit SizeEach
内容与储存
储存于 4°C。

常见问题解答 (FAQ)

Can you provide the shelf-life for Sulfo-SBED Biotin Label Transfer Reagent?

Sulfo-SBED Biotin Label Transfer Reagent is covered under our general 1-year warranty and is guaranteed to be fully functional for 12 months from the date of shipment, if stored as recommended. Please see section 8.1 of our Terms & Conditions of Sale (https://www.thermofisher.com/content/dam/LifeTech/Documents/PDFs/Terms-and-Conditions-of-Sale.pdf) for more details.

Find additional tips, troubleshooting help, and resources within our Protein Purification and Isolation Support Center.

How does a product with "No-Weigh" format reduce my concern over reagent stability?

The No-Weigh product format, where small amounts of reagent are pre-weighed and packaged separately, prevents the contamination and loss of reagent reactivity over time associated with repetitive opening and closing of a single vial. This format enables use of a fresh vial of reagent each time and eliminates the hassle of weighing out small amounts of reagent. Please view additional information and the video at: https://www.thermofisher.com/us/en/home/life-science/protein-biology/protein-labeling-crosslinking/no-weigh-packaging.html

Find additional tips, troubleshooting help, and resources within our Protein Assays and Analysis Support Center.

What crosslinkers do you recommend to study protein-protein interactions that are mass spectrometry - compatible?

We offer Sufo-SBED (Cat. Nos. 33033 and A39260).

Find additional tips, troubleshooting help, and resources within our Protein Purification and Isolation Support Center.

What are the options for crosslinking proteins to nucleic acids, and what are the differences between them?

We offer the following crosslinkers for protein to nucleic acids: formaldehyde (Cat. No. 28906), SPB (Cat. No. 23013), SDAD (Cat. No. 26169), sulfo-SDAD (Cat. No. 26175), and sulfo-SBED (Cat. No. A39260).
Formaldehyde can be used for DNA-DNA crosslinking as well as DNA-protein crosslinking. While it is good for crosslinking proteins that are in direct contact with DNA, formaldehyde cannot link proteins that may be bound in a complex with other proteins but are not in direct contact with DNA. EGS or DSG can crosslink proteins to other proteins that are in direct contact with DNA and crosslinked to DNA by formaldehyde.
SPB, Sulfo-SDAD, and Sulfo-SBED are all photoreactive crosslinkers. SPB is an NHS-ester and psoralen heterobifunctional crosslinker that conjugates primary amines on proteins to DNA via photo-activated intercalation of psoralen to pyrimidine bases. The psoralen tricyclic planar ring system intercalates into double-stranded, and to a lesser extent, single-stranded DNA and RNA. The photoreactive psoralen group provides more selective covalent binding to nucleic acids than either phenyl azide or diazerine linkers, which makes SPB the best choice. The diazerine on sulfo-SDAD and the phenyl azide on sulfo-SBED are not selective for nucleic acids and can crosslink other biomolecules in the same besides any protein-DNA interactions. Sulfo-SBED involves biotin transfer rather than actual linking.

Find additional tips, troubleshooting help, and resources within our Protein Purification and Isolation Support Center.