Nickel etchant for evaporated nickel films - FAQs

5 个常见问题解答

What is the etch rate of Nickel etchant for evaporated nickel films at 30 degrees C?

Nickel etchant for evaporated nickel films has an etch rate of 25 Å/second at 30 degrees C.

Undercutting of the etchant can be reduced by increasing the rate of stirring or agitation.

No, it is a ready-to-use solution. Dilution will only be necessary if you want to reduce the etch rate.

The etch rate of the etchant can be reduced by adding 1 part deionized water to 2 parts etchant. This will reduce the etch rate approximately 50%.

The etch rate of the etchant will be increased by increasing the rate of stirring or agitation.