Search
Search
View additional product information for Antibiotic-Antimycotic (100X) - FAQs (15240112, 15240096, 15240062)
11 product FAQs found
当不可替代的培养物被污染时，研究人员可能会试图控制或消除污染。
1.用户需要确定污染的来源是细菌、真菌、支原体，还是酵母。请点击此处(https://www.thermofisher.com/us/en/home/references/gibco-cell-culture-basics/biological-contamination/bacterial-contamination.h%E2%84%A2l)阅读更多信息，以了解每一种污染的特性。
2.把受污染的培养物跟其他细胞系进行隔离。
3.使用一款实验室消毒剂清洁培养箱和层流柜，并检查HEPA过滤器。
4.高浓度的抗生素和抗真菌剂可能对一些细胞系有毒性。因此，需进行剂量效应测试来确定何种浓度水平的抗生素或抗真菌会造成毒性。这一操作对于使用Gibco Fungizone一类的抗真菌剂或泰乐菌素一类的抗生素尤其重要。
下列操作为我们确定毒性水平和对培养物去污染的推荐步骤：
1.对细胞进行分离，计数, 使用不含抗生素的培养基稀释将细胞稀释至常规传代的浓度。
2.将细胞悬液分入多孔培养板或几个小培养瓶中。向每一培养孔中添加不同浓度的特定抗生素。举例来说，我们推荐以如下浓度测试Gibco Fungizone试剂:0.25，0.50，1.0，2.0，4.0和8.0 µg/mL。
3.每日观察细胞脱落，出现空泡，融汇度降低，细胞变圆一类的毒性效应。
4.一旦确定了抗生素的毒性浓度水平，就可使用比毒性浓度低一至两倍的抗生素浓度来培养细胞两至三代。
5.在不含抗生素的培养基中培养一代。
6.重复步骤4。
7.在不含抗生素的培养基中培养细胞四至六代，以确定污染是否成功被消除。
请访问如下页面(https://www.thermofisher.com/us/en/home/life-science/cell-culture/mammalian-cell-culture/antibiotics.html)浏览我们提供的细胞培养相关的抗生素产品。
The use of antibiotics is not recommended during episomal reprogramming, especially Fungizone antimycotic. If antibiotics must be used during the reprogramming process, pen/strep could be used. For established iPSCs (after reprogramming is complete), either antibiotic/antimycotic or pen/strep should be fine.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
Yes, however, we do not recommend adding antibiotics to the medium at the time of thawing. Thaw cells into medium without antibiotic and allow the cells to recover from the thawing process. After that, you can add antibiotics by diluting into the medium.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
The components are in a 0.85% saline solution.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
This solution contains 10,000 units/mL of penicillin, 10,000 µg/mL of streptomycin, and 25 µg/mL of Gibco Amphotericin B.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
The recommended condition is storage at -5 to -20 degrees C and when stored as recommended, the shelf life is 12 months from the date of shipment.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
The accurate way would be to dilute 5 mL of Antibiotic-Antimycotic (100X) into 495 mL of medium. Please note that the volume of medium in a 500 mL medium bottle is not exactly 500 mL. It could range from 500.5 - 510.5 mL.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
Yes. We use Antibiotic-Antimycotic (Cat. No. 15240062) for additional protection from contamination.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
When an irreplaceable culture becomes contaminated, researchers may attempt to eliminate or control the contamination.
1. Determine if the contamination is bacteria, fungus, mycoplasma, or yeast. Read more here to view characteristics of each contaminant.
2. Isolate the contaminated culture from other cell lines.
3. Clean incubators and laminar flow hoods with a laboratory disinfectant, and check HEPA filters.
4. Antibiotics and antimycotics at high concentrations can be toxic to some cell lines. Therefore, perform a dose-response test to determine the level at which an antibiotic or antimycotic becomes toxic. This is particularly important when using an antimycotic such as Gibco Fungizone reagent or an antibiotic such as tylosin.
The following is a suggested procedure for determining toxicity levels and decontaminating cultures:
1. Dissociate, count, and dilute the cells in antibiotic-free media. Dilute the cells to the concentration used for regular cell passage.
2. Dispense the cell suspension into a multiwell culture plate or several small flasks. Add the antibiotic of choice to each well in a range of concentrations. For example, we suggest the following concentrations for Gibco Fungizone reagent: 0.25, 0.50, 1.0, 2.0, 4.0, and 8.0 µg/mL.
3. Observe the cells daily for signs of toxicity such as sloughing, appearance of vacuoles, decrease in confluency, and rounding.
4. When the toxic antibiotic level has been determined, culture the cells for two to three passages using the antibiotic at a concentration one- to two-fold lower than the toxic concentration.
5. Culture the cells for one passage in antibiotic-free media.
6. Repeat step 4.
7. Culture the cells in antibiotic-free medium for four to six passages to determine if the contamination has been eliminated.
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.
Please view the following page to browse the cell culture antibiotics we offer (https://www.thermofisher.com/us/en/home/life-science/cell-culture/mammalian-cell-culture/antibiotics.html).
Find additional tips, troubleshooting help, and resources within our Cell Culture Support Center.