单细胞裂解试剂盒
单细胞裂解试剂盒
单细胞裂解试剂盒
单细胞裂解试剂盒
Invitrogen™

单细胞裂解试剂盒

Green features
单细胞分析有可能改变生命科学研究。然而,检出和定量测定单细胞中所含的微量 RNA 仍然是一个巨大的挑战。Ambion™ 单细胞裂解试剂盒可为单细胞提供可靠的 RNA 制备流程。主要产品特点:•优化样品制备—可完成单细胞 RNA了解更多信息
Have Questions?
货号数量
4458235100 preps
货号 4458235
价格(CNY)
9,228.00
Each
添加至购物车
数量:
100 preps
价格(CNY)
9,228.00
Each
添加至购物车
单细胞分析有可能改变生命科学研究。然而,检出和定量测定单细胞中所含的微量 RNA 仍然是一个巨大的挑战。Ambion™ 单细胞裂解试剂盒可为单细胞提供可靠的 RNA 制备流程。

主要产品特点:

•优化样品制备—可完成单细胞 RNA 制备
• 高效设计—无样品损失,确保较大的灵敏度
• 应用广泛—与常见酶促反应兼容

1-10 个细胞的优化 RNA 样品制备
Ambion™ 单细胞裂解试剂盒可完成 1-10 个细胞的 RNA 制备。单细胞裂解试剂盒通过优化的裂解缓冲液、终止液和 DNase 组合生成浓缩的细胞裂解物。所得裂解物与常见酶促反应(如逆转录)兼容。样品制备速度较快,仅通过 2 个移液步骤即可在 7 分钟内完成(图 1)。

无样品损失,确保较大的灵敏度
Ambion™ 单细胞裂解试剂盒绕过了传统 RNA 纯化的需求。无需可能导致珍贵样品损失和⁄或稀释的样品转移、色谱柱或洗涤。全部裂解物可用于下游反应,确保实验较大的灵敏度和准确度。

与常见酶促反应兼容
Ambion™ 单细胞裂解试剂盒中的试剂与完整 Single Cell-to-CT™ 试剂盒中的裂解试剂相同,可用于对 1-10 个细胞进行实时 RT-PCR 分析。已使用多种逆转录试剂盒(包括 SuperScript™ VILO™ cDNA 合成试剂盒、高容量 RNA-cDNA 试剂盒和 TaqMan™ MicroRNA 逆转录试剂盒)进行了验证,以用于 mRNA 和 miRNA 靶标分析。作为一个独立模块,单细胞裂解试剂盒使您可以创建新的工作流程以拓展单细胞分析的可能性。
仅供科研使用。不可用于诊断程序。
规格
最终产品类型裂解物
环保功能所用资源更少、废弃物更少、危害更小
高通量能力不兼容高通量应用(手动)
反应次数100 次制备
产品线Ambion™、Cells-to-CT™
纯化时间7 min。
数量100 preps
样品类型细菌、血液、细胞、组织、病毒样品
运输条件干冰
原始材料1-10 个细胞
靶标裂解物、即用型实时荧光定量 PCR
最大浓度2X
适用于(应用)实时 PCR (qPCR), RT-PCR
Unit SizeEach
内容与储存
试剂盒包含:
  • 100 μl 单细胞 DNase I:-20°C;
  • 1 ml 单细胞裂解液:4°C;
  • 100 μl 单细胞终止液:-20°C

常见问题解答 (FAQ)

What is the minimum amount of cells required to perform RNA isolation using the Single Cell Lysis Kit?

The Single Cell Lysis Kit enables RNA preparation from 1-10 cells. It generates a concentrated cell lysate through the optimized combination of lysis buffer, stop solution, and DNase. The resulting lysate is compatible with common enzymatic reactions such as reverse transcription. Sample preparation is fast and can typically be completed in around 7 minutes with 2 pipetting steps.

Can laser micro-dissected FFPE single cells be used with a Single Cell-to-CT Kit?

While we have not tried this in-house, there is reason to believe this should work. However, optimization of the protocol around the RT step may be needed, as FFPE samples have a lot of RNA crosslinking, which could affect the efficiency of the RT enzyme. Heating the sample for 10 min at 80 degrees C before adding the RT in order to get good cDNA conversion should improve reverse transcription.

Find additional tips, troubleshooting help, and resources within our Real-Time PCR and Digital PCR Applications Support Center.