Bac-to-Bac™ HBM TOPO™ 分泌表达系统
Bac-to-Bac™ HBM TOPO™ 分泌表达系统
Gibco™

Bac-to-Bac™ HBM TOPO™ 分泌表达系统

Bac-to-Bac baculovirus expression is an efficient method for producing baculovirus for high-level protein expression in insect cells. It relies on了解更多信息
Have Questions?
货号数量
A1133920 次反应
货号 A11339
价格(CNY)
-
数量:
20 次反应
Bac-to-Bac baculovirus expression is an efficient method for producing baculovirus for high-level protein expression in insect cells. It relies on generation of recombinant virus by site-specific transposition in E. coli rather than homologous recombination in insect cells. The pFastBac HBM TOPO expression system features:

Expression of secreted proteins—The Bac-to-Bac HBM TOPO vector contains the honeybee melittin (HBM) secretion signal to enable secreted protein expression. Because glycoproteins cannot be glycosylated in the absence of a secretion signal, this vector is recommended for the expression of glycoproteins.

Flexibility—The Bac-to-Bac HBM TOPO vector contains a C-terminal His-tag with a TEV cleavage site to enable easy purification of His-tagged proteins with nickel-chelating resins (such as the Invitrogen ProBond Purification System) and generation of native proteins with the aid of the Invitrogen AcTEV Protease.

Fast cloning, easy screening—Blunt TOPO cloning technology enables cloning of blunt-end PCR products into the pFastBac TOPO vector in five minutes. In addition, the pFastBac TOPO expression kit is supplied with Mach1-T1R E. coli that enable the visualization of colonies eight hours after plating on ampicillin-selective plates due to their faster doubling time compared to other standard cloning strains. Find out more about the advantages of TOPO cloning ›

High transfection efficiency with ExpiFectamine Sf Transfection Reagent—The Bac-to-Bac TOPO expression kits now come with the next-generation ExpiFectamine Sf Transfection Reagent for efficient DNA transfection in insect cells using fast, flexible protocols. Find out more about this reagent ›

Time-saving expression bacmid—With the Bac-to-Bac system, the expression cassette of the pFastBac vector recombines with the parent bacmid in DH10Bac E. coli Competent Cells to form an expression bacmid. The bacmid is then transfected into insect cells for production of recombinant baculovirus particles.

Easy colony screening—The parent bacmid in DH10Bac E. coli contains a segment of the lacZa gene. The lacZa gene is disrupted upon transposition of the expression cassette into the bacmid, allowing for blue/white selection of recombinants for easier identification of recombinant colonies.

High protein expression—The pFastBac vector uses the strong polyhedrin promoter to generate high levels of expression in a variety of insect cell line such as Sf9, Sf21, and High Five cells.

仅供科研使用。不可用于诊断程序。
规格
克隆方法Blunt TOPO™
表达机制基于细胞的表达
产品线Bac-to-Bac™、TOPO™
蛋白标记His 标签 (6x)
数量20 次反应
选择试剂(真核生物)
表达系统杆状病毒
促进剂多角体蛋白
类型分泌型表达系统
Unit SizeEach
内容与储存
Bac-to-Bac HBM TOPO 分泌表达系统:
•用于 20 次 TOPO 克隆反应的载体试剂盒,在 -20°C 下储存
   – pFastBac/HBM-TOPO 载体含有 C 端 TEV 裂解位点和 His 标签
   –pFastBac 1-Gus 对照质粒(对照表达载体)
   –其他试剂盒试剂:10X PCR、dNTP 混合物、盐溶液、无菌水、对照 PCR 模板、多角体蛋白正向引物、SV40 pA 反向引物
• 用于 20 次反应的 One Shot Mach1-T1R 化学感受态大肠杆菌 (20 x 50 µL),在 -80°C 下储存
• 用于 20 次反应的 MAX Efficiency DH10Bac 感受态大肠杆菌(4 个试剂盒,每个试剂盒 5 x 0.1 mL),在 -80°C 下储存
• ExpiFectamine Sf 转染试剂 (1 mL),在 4°C 下储存,切勿冷冻

常见问题解答 (FAQ)

白色菌落不能在液体培养基中生长。我该怎么办?

庆大霉素浓度可能过高。尝试降低庆大霉素的浓度至5 µg/mL,并在培养基中加入更多菌落。

为什么会出现蓝色菌落?为什么会出现中心为蓝色而边缘为白色的菌落?

若出现蓝色菌落,则大肠杆菌含有杆粒和质粒,使细胞能在筛选过程中存活。但是,由于未发生转座,所以LacZ基因未被破坏。靶心菌落表示在菌落生长时发生转座。将从混合克隆白色部分中分离得到的克隆重新划线,应该能够得到发生过转座的菌落。

我得到的主要是白色/野生型空斑,而不是蓝色/重组型空斑。哪里出错了?

这是同源性重组较差的典型标志。应检查使用的质粒/线性DNA比例。但是,如果存在一些蓝色空斑,则对那些病毒进行扩增并检测它们的蛋白。根据我们的经验,它们应该是正确的,即使其丰度相对较低。

感染细胞后,我在一个细胞中看到较大的多角体,而在相邻细胞中看到较小的多角体(数量更多)。这正常吗?

是的,细胞被单个野生型病毒感染后,会以不同速度生成多角体,直到培养瓶中所有的细胞都被感染。细胞中多角体的形成需要3-4天左右,其大小和数量各不相同,直至达到最大能力并发生细胞破裂,从而将微小的病毒颗粒释放到培养基中。

我担心得不到空斑。出现空斑需要几天?空斑通常为多大?

正常情况下,约5-7天会出现很小的白点,约10天出现1 mm空斑。空斑的大小范围为1 mm至4 mm。