Pharma KingFisher™ Flex 96 标准板
Pharma KingFisher™ Flex 96 标准板
Applied Biosystems™

Pharma KingFisher™ Flex 96 标准板

这些标准板与 Pharma KingFisher Flex 96 深孔磁头磁颗粒物处理器或 MagMAX Express-96 标准磁颗粒物处理器以及 PrepSEQ了解更多信息
Have Questions?
货号数量
A4307648 plates
货号 A43076
价格(CNY)
1,945.00
Each
添加至购物车
数量:
48 plates
价格(CNY)
1,945.00
Each
添加至购物车
这些标准板与 Pharma KingFisher Flex 96 深孔磁头磁颗粒物处理器或 MagMAX Express-96 标准磁颗粒物处理器以及 PrepSEQ ResDNA 试剂盒和 ProteinSEQ 试剂盒配合使用。标准配置与深孔配置不同之处在于样品输入体积为 20–200 μL/孔,相比之下在深孔配置中为 100–1000 μL/孔。

使用专门设计用于与这些仪器配合使用的 KingFisher Flex 系统耗材优化性能。KingFisher Flex 一次性塑料制品(吸头梳齿和微孔板)由聚丙烯制成,由于对生物分子的结合亲和力低,是磁粒子处理的理想选择。其特殊的设计确保出色的磁珠回收。
仅供科研使用。不可用于诊断程序。
规格
适用于(设备)KingFisher™ Flex
包装48 块板
产品类型塑料、无涂层、非无菌孔板
数量48 plates
运输条件室温
条形码无条形码
颜色清除
材质聚丙烯
孔数量96
产品线KingFisher Flex™
孔容积(公制)1000 μL
Unit SizeEach
内容与储存
48 标准孔 96 孔板

常见问题解答 (FAQ)

My Pharma KingFisher Flex run was stopped due to an error message. Can I start the protocol from where it stopped?

No, once a protocol was stopped, it will restart from the beginning. The extraction procedure can either be finished manually by using a magnetic stand, or a modified version of the original Pharma KingFisher Flex script would have to be created that starts off at the point where the run was stopped.

Is it always necessary to use the transport locks on the Pharma KingFisher Flex instrument?

The transport locks are only necessary when relocating the instrument.

Are the volumes of reagents in each well critical for a successful Pharma KingFisher Flex run?

We strongly recommend that you maintain the specified volumes within the defined limits to avoid spillover and to help ensure the best performance at the most efficient level.

What if the magnetic particles are attached to the tip combs after my Pharma KingFisher Flex run?

This happens sometimes but it will not affect the yield because the sample has been released from the particles.

What if the magnetic particles remain in the sample well during a Pharma KingFisher Flex run?

If the starting material is too viscous, the magnetic rods will not be able to collect the particles. Dilute the sample and check that the sample is properly homogenized/lysed. Adding low amounts of detergent will improve the collection of magnetic particles as well. Quickly centrifuge the plate to sediment the particles to the bottom of the plate.