Mother E-Base™ Device - FAQs

请检查 E-Gel胶盒和铜电极。你可以换一个新的胶盒看看是否接触不良。过冷的胶盒或不恰当的操作条件也可能造成这个问题。胶盒应在室温使用，避免将其保存在4°C。

EG程序用于E-Gel 96和48凝胶电泳，而EP用于E-PAGE 96和48凝胶电泳。

我们建议保持Mother E-Base设备和Daughter E-Base设备表面无污染物。清洁设备时，先将基座与电源断开，再用干布擦拭。不要试图打开或维修基座。

我们推荐使用EP程序进行E-PAGE凝胶电泳。

Mother E-Base设备（货号EB-M03）带有可直接连到插座的电源线，用于1块E-PAGE凝胶的电泳。Daughter E-Base设备（货号EB-D03）可连接到Mother E-Base和另一台Daughter E-Base设备上，用于2块或更多凝胶同时电泳。Daughter E-Base设备不与电源线连接，不可脱离Mother E-Base设备而单独使用。测试证明，1台Mother E-Base最多同时与3台Daughter E-Bases连接用于电泳。

Check the E-Gel cassette and copper contacts. You can try replacing the gel cassette with a fresh gel cassette to see whether this fixes the problem. A cold cassette or improper operating conditions can also lead to this failure. Cassettes should be at room temperature for use; avoid storing at 4°C.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

The EG program is to run E-Gel 96 and 48 gels, while the EP is to run the E-PAGE 96 and 48 gels.

Find additional tips, troubleshooting help, and resources within our Nucleic Acid Purification and Analysis Support Center.

We recommend keeping the surfaces of the Mother E-Base Device and Daughter E-Base Device free of contaminants. To clean, disconnect bases from power source and wipe with a dry cloth. Do not attempt to open or service the bases.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

We recommend using the EP program for running E-PAGE gels.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

The Mother E-Base device (Cat. No. EB-M03) comes with a power cord that can be connected directly to an electrical outlet and is used for electrophoresis of one E-PAGE gel. The Daughter E-Base device (Cat. No. EB-D03) connects to the Mother E-Base device and to other Daughter E-Base devices for the simultaneous electrophoresis of two or more gels. The Daughter E-Base device does not connect with a power cord and cannot be used without a Mother E-Base device. The Mother E-Base device has been tested for electrophoresis with up to three Daughter E-Bases devices connected at one time.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.