Fluo-4 Direct™ 钙含量检测试剂盒
Product Image
Invitrogen™

Fluo-4 Direct™ 钙含量检测试剂盒

Fluo-4 Direct™ 钙含量测定试剂盒专门用于提供均相荧光钙含量测定试剂盒，其具有以下特点：1.轻松加载至细胞内 2.获得较大的测定窗口，以及3.在完全培养基中抑制钙指示剂生成的背景荧光，对特定细胞荧光几乎没有影响 这种先进的配方可以在含血清的培养基中以简单的“单纯加样”形式进行测定。Fluo-4 Direct™ 是 Fluo-4 钙含量检测试剂系列的第三款产品了解更多信息
Have Questions?
更改视图buttonViewtableView
货号数量
F104731000 ml
F10471100 ml
F10472100 ml
货号 F10473
价格（CNY)
38,881.00
飞享价
Ends: 31-Dec-2025
50,998.00
共减 12,117.00 (24%)
Each
添加至购物车
数量:
1000 ml
价格（CNY)
38,881.00
飞享价
Ends: 31-Dec-2025
50,998.00
共减 12,117.00 (24%)
Each
添加至购物车
Fluo-4 Direct™ 钙含量测定试剂盒专门用于提供均相荧光钙含量测定试剂盒，其具有以下特点：
1.轻松加载至细胞内
2.获得较大的测定窗口，以及
3.在完全培养基中抑制钙指示剂生成的背景荧光，对特定细胞荧光几乎没有影响

这种先进的配方可以在含血清的培养基中以简单的“单纯加样”形式进行测定。Fluo-4 Direct™ 是 Fluo-4 钙含量检测试剂系列的第三款产品。Fluo-4 AM 和 Fluo-4 NW 都需要在测定试剂盒检测前除去培养基，但 Fluo-4 NW 通过使用便于细胞加载的 PowerLoad™ 试剂增加了便利性。Fluo-4 Direct™ 钙含量测定试剂盒与 Fluo-4 NW 类似，其配方同样含有 PowerLoad™ 以方便细胞加载，但独特之处在于其能够在完全培养基内使用，并且可以有效抑制背景荧光，而不会影响测定中产生的特定细胞荧光。
仅供科研使用。不可用于诊断程序。
规格
检测方法荧光
染料类型基于荧光染料
形式粉末
修改化学修饰
数量1000 ml
运输条件室温
子细胞定位细胞核、细胞器、细胞质
颜色绿色
发射可见光
适用于（应用）细胞活力与增殖
适用于（设备）共聚焦显微镜, 荧光显微镜, 高内涵分析仪, HTS 读数仪, 微孔板读数仪, 荧光成像仪
产品线Molecular Probes™
产品类型钙含量测定试剂盒
Unit SizeEach
内容与储存
  • 1 L Fluo-4 Direct™ 钙含量测定试剂（组分 A）
  • 1.54 g 丙磺舒（组份 B）
  • 保存于 ≤-20°C 。干燥避光储存。

常见问题解答 (FAQ)

I am doing calcium flux imaging with your Fura-2 calibration kit, but am seeing a large variability in ratio in different places around the slide. I am correcting for uniform illumination, using the product as directed, and sealing the coverslip with nail polish.

The nail polish may be the problem. The Kd value (calcium sensitivity) changes depending upon the dye's environment. Nail polish has solvents that can leech under the coverslip and cause variability. We recommend either going without a sealing or sealing with melted paraffin painted on the coverslip edges with a cotton-tipped applicator (paraffin is hydrophobic and has no solvents).

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

I need to label cells with Fluo-4, AM, for a calcium flux assay. How long after labeling will the dye be retained?

After loading dye into the cells, intracellular esterases remove the 'AM' moiety from the dye. When the 'AM' group is removed, the dye is able to bind calcium and fluoresce. Since the dye is not covalently bound to any cellular components, it may be actively effluxed from the cell. The rate of efflux is dependent upon the inherent properties of the cell, culture conditions and other factors. The dye may be retained for hours, days or even weeks or lost in a matter of minutes. The use of Probenecid (Cat. No. P36400) limits loss by active efflux.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.