用于细胞凋亡检测的 Annexin V Ready Flow 偶联物
用于细胞凋亡检测的 Annexin V Ready Flow 偶联物
Invitrogen™

用于细胞凋亡检测的 Annexin V Ready Flow 偶联物

Annexin V 偶联物染色剂使您能够通过流式细胞分析轻松确定凋亡细胞。
Have Questions?
更改视图buttonViewtableView
货号激发/发射颜色偶联物
R37175650/665远红外Alexa Fluor 647
R37174495/519绿色Alexa Fluor 488
R37176650/660红色APC(别藻蓝素)
R37177410/455蓝色Pacific Blue
货号 R37175
价格(CNY)
3,905.00
飞享价
Ends: 31-Dec-2025
5,187.00
共减 1,282.00 (25%)
Each
添加至购物车
激发/发射:
650/665
颜色:
远红外
偶联物:
Alexa Fluor 647
价格(CNY)
3,905.00
飞享价
Ends: 31-Dec-2025
5,187.00
共减 1,282.00 (25%)
Each
添加至购物车
使用流式细胞分析,即用型 Annexin V Ready Flow 独立偶联物染色剂在凋亡细胞与非凋亡细胞之间的荧光信号强度差异达 100 倍,您可乐享其便利性。无需稀释、称量或量取偶联物染色剂;只需将一滴加入细胞中进行孵育和分析即可。
Annexin V 偶联物为研究磷脂酰丝氨酸(是细胞凋亡中期标志)的外化提供了快速而可靠的检测方法。经我们的荧光膜联蛋白V偶联物染色后,凋亡细胞和未凋亡细胞显示出不同的荧光强度,流式细胞分析它们的差异通常约为 100 倍。

Annexin V Ready Flow 偶联物以可直接加入到样品中的即用型凋亡细胞染色剂形式提供。只需从滴瓶中吸取一滴,直接加入到含有 1 x 106 个细胞的 5 mM 含 Ca2+ 的细胞培养基或膜联蛋白结合缓冲液(货号:V13246 或 BMS500BB)中,然后培养和分析。传统的膜联蛋白染色方案可以作为替代方法使用,但不是加入 5 μL 膜联蛋白偶联物,而是从 Ready Flow 滴瓶吸取 1 滴并加入。

Annexin V Alexa Fluor 488 偶联物的激发波长为 495 nm,发射峰为 519 nm。
Annexin V Alexa Fluor 647 偶联物的激发波长为 650 nm,发射峰为 665 nm。
Annexin V APC 偶联物的激发波长为 650 nm,发射峰波长为 660 nm。
Annexin V Pacific Blue 偶联物的激发波长为 410 nm,发射峰波长为 455 nm。
只有活细胞和组织才能检测凋亡细胞的膜联蛋白V。如果样品染色后被固定,则需要特定的条件来保留信号。包括使用不含酒精的乙醛固定方法、使用含 Ca2+ 但不含表面活性剂/去污剂的缓冲液。为方便您使用,我们还提供了浓缩膜联蛋白结合缓冲液,用于在细胞凋亡检测中促进膜联蛋白 V 与磷脂酰丝氨酸结合。

仅供科研使用。不可用于诊断程序。
规格
颜色远红外
描述Annexin V Alexa Fluor 647 Ready Flow 偶联物
激发/发射650/665
流式细胞仪激光线路红色
适用于(设备)流式细胞仪
套装内容2 个滴瓶,在室温下储存
产品类型Ready Flow 偶联物
数量120 reactions
运输条件室温
偶联物Alexa Fluor 647
Unit SizeEach
内容与储存
在室温下储存。

常见问题解答 (FAQ)

I would like to label only 100 µL of sample of the same cell density using a Ready Flow product. The manual notes 2 drops per 1 mL (1 X 10E6 cells/mL). May I scale down for smaller volumes?

Yes, you may scale up or down as needed, but we recommend keeping the cell density the same. There are 41 µL per drop, so 2 drops is 82 µL (for the 1 mL of sample). You need to only scale down for this 100 µL volume, which would be 8.2 µL.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

What is the concentration of dye/reagent in the Ready Flow products?

The amount of dye or reagent in the Ready Flow products is proprietary. If you need to consider the exact amount of dye or reagent for your experiment, each of the Ready Flow reagents is available as a standalone product.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

Can I use the ReadyProbes reagents for flow cytometry?

This is not recommended. The ReadyProbes reagents were developed for imaging applications whereas the Ready Flow reagents were optimized for flow cytometry.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.