Flp-In™-Jurkat 细胞系
Product Image
Invitrogen™

Flp-In™-Jurkat 细胞系

Flp-In™ 细胞系设计用于快速生成稳定细胞系以从 Flp-In™ 表达载体表达关注的蛋白。这些细胞在转录活性基因组基因座处包含一个稳定整合的 FRT 位点。Flp-In™ 表达载体的靶向整合可确保您的目的基因高水平表达。有六种了解更多信息
Have Questions?
货号数量
R762071 mL
货号 R76207
价格(CNY)
21,090.00
Each
添加至购物车
数量:
1 mL
价格(CNY)
21,090.00
Each
添加至购物车
Flp-In™ 细胞系设计用于快速生成稳定细胞系以从 Flp-In™ 表达载体表达关注的蛋白。这些细胞在转录活性基因组基因座处包含一个稳定整合的 FRT 位点。Flp-In™ 表达载体的靶向整合可确保您的目的基因高水平表达。有六种 Flp-In™ 细胞系可用于生成同基因稳定细胞系,还有一种 Flp-In™ T-REx™ 细胞系用于生成四环素调节的稳定细胞系。Flp-In™-CV-1、Flp-In™-293、Flp-In™-BHK、Flp-In™-Jurkat 和 Flp-In™-3T3 细胞系的形成过程是利用 pFRT/lacZeo 转染亲本细胞系,并选择用于稳定 Zeocin™ 抗性克隆。Flp-In™-CHO 细胞系的形成过程是利用 pFRT/lacZeo2 转染 CHO 细胞,并选择用于 Zeocin™ 抗性克隆。Flp-In™ T-REx™-293 细胞系含有稳定整合的 pFRT/lacZeo 和 pcDNA™6/TR(来自 T-REx™ 系统)。使用 Flp-In™ 表达载体和 Flp 重组酶载体 pOG44 共转染 Flp-In™ 细胞系可以在每个细胞中将表达载体靶向整合到同一个位点中,确保均一水平的基因表达。

选择您的 Flp-In™ 载体/细胞系组合
Flp-In™-CV-1、Flp-In™-293、Flp-In™-CHO 和 Flp-In™ Jurkat 细胞系(图 1)与表达 CMV 启动子基因的 Flp-In™ 载体(pcDNA™5/FRT、pcDNA5/FRT/V5-His-TOPO™ 和 pSecTag/FRT/V5-His-TOPO™)配合使用。Flp-In™-BHK 和 Flp-In™-3T3 细胞往往会下调 CMV 启动子。因此,建议将含有 EF-1α 启动子(pEF5/FRT/V5-DEST™ 和 pEF5/FRT/V5-D-TOPO™)的 Flp-In™ 载体与这些细胞系配合使用。
仅供科研使用。不可用于诊断程序。
规格
细胞系Flp-In™-Jurkat 细胞系
数量1 mL
种属
产品线Flp-In
蛋白标记pSec
Unit SizeEach
内容与储存
3 x 106 个细胞以 1 mL 90% 完全培养基和 10% DMSO 形式冷冻供应。细胞必须储存在液氮中。妥善储存时,保证细胞稳定储存 6 个月。

常见问题解答 (FAQ)

我有你们的Flp-In Jurkat细胞产品,并尝试使用手册中推荐的方案进行复苏,但存活率极低。你们认为是何处出了差错?

Flp-In Jurkat细胞的操作需要一些技巧,它们对离心操作非常敏感。你可以尝试使用以下方法来复苏细胞:

•将1管细胞解冻至含有5-7 mL新鲜培养基的T25培养瓶中(没有抗生素)。此时请勿通过离心来去除DMSO,它们对于各种操作非常敏感(包括离心)。通常情况下,解冻后会出现大量碎片。
•解冻后24小时之后,以900 rpm 2-3分钟的离心条件沉淀细胞,并使用5 mL新鲜培养基轻柔重悬细胞。将所有细胞整体离心会显著减少培养物中的碎片数量。
•培养5或6天时即可加入筛选剂。在1.5周的时间内,按照2-3天的频率持续传代细胞(离心沉淀细胞),每一次都将细胞重悬至仅含5-7 ml新鲜培养基的T25培养瓶中,以重建细胞密度。Jurkat细胞非常细小和容易聚团,而且扩增得很慢。
•仅在1.5周左右后,可以尝试将细胞传入T75培养瓶中进行扩增。

Flp-In表达载体是否兼容多重整合操作?你们如何筛选多重整合元件?而这些元件在Flp-In表达细胞系中的稳定性如何?

在理论上来讲,用户能够实现Flp-In表达载体的多重整合效果——这其中包含了一个FRT-特异性的整合事件和一个随机的第二位点整合事件。不过,随机整合的发生概率相对较低。转染过程中所用DNA的有限数量将减少第二位点的整合概率。我们向293细胞(缺少FRT位点)中转染了pcDNA5/FRT载体,并在筛选了200个以上的克隆后,鉴定到一个潜在的第二整合位点。用户可通过Southern杂交来检测DNA的整合位点。单一整合元件会显示为独立的一个条带;两个整合位点:两个条带;三个位点,三条带,如此延续。我们将一些Flp-In表达细胞系培养了四个月以上,无论是否向培养体系中加入潮霉素,均未发现Flp-In表达载体发生任何形式的丢失。

你们提供哪些种类的Flp-In T-REx细胞系?

我们提供向HEK293细胞中稳定整合了pFRT/lacZeo和pcDNA6/TR的Flp-In T-REx系统。该细胞系经功能性测试,能够有效调控目的基因的表达。

I have your Flp-In Jurkat cells that I tried to thaw using the protocol suggested in your manual, but got very poor viability. What do you think went wrong?

Flp-In Jurkat cells are a little tricky to handle and are very sensitive to centrifugation. You may try the following protocol to thaw the cells:

- Thaw 1 vial of cells into a T25 flask containing 5-7 mL of fresh medium (without selection). Do not spin down the cells to remove the DMSO at this point, as they are very sensitive to handling (including centrifugation). Typically, there is a lot of debris present upon thaw.
- 24 hours post-thaw, spin down the cells at 900 rpm for 2-3 minutes and resuspend gently into 5 mL of fresh medium. Spinning down the entire volume of cells greatly reduces the amount of debris in the culture.
- At day 5 or 6, it is okay to add the selection. Continue to passage the cells (spinning the cells down) every 2-3 days for a total of 1.5 weeks, each time resuspending back into only 5-7 ml of fresh medium in a T25 flask to build up the cell density. The Jurkat cells are very small and clumpy, and they expand very slowly.
- Attempt to expand the cells into a T75 flask only after about 1.5 weeks.

Is multiple integration of the Flp-In expression construct possible? How do you screen for multiple integrants, and how stable is the Flp-In expression cell line?

In theory, one can get multiple integrations of the Flp-In expression construct—an FRT-specific integration event and a random, second-site integration. However, random integration is a relatively uncommon event. Limiting the amount of DNA in the transfection will reduce the chance of second-site integration. We have transfected 293 cells (lacking the FRT site) with the pcDNA5/FRT vector and have identified one potential second-site integrant after screening over 200 clones. DNA integrations can be detected by Southern blot. A single integrant will display a single band; double: two; triple: three, etc. We have maintained a number of Flp-In expression cell lines for over four months and have not observed any loss of the Flp-In expression construct, whether hygromycin selection was maintained or not.

Find additional tips, troubleshooting help, and resources within our Protein Expression Support Center.

引用和文献 (1)

引用和文献
Abstract
The MLL fusion gene, MLL-AF4, regulates cyclin-dependent kinase inhibitor CDKN1B (p27kip1) expression.
Authors:Xia ZB, Popovic R, Chen J, Theisler C, Stuart T, Santillan DA, Erfurth F, Diaz MO, Zeleznik-Le NJ,
Journal:Proc Natl Acad Sci U S A
PubMed ID:16169901
MLL, involved in many chromosomal translocations associated with acute myeloid and lymphoid leukemia, has >50 known partner genes with which it is able to form in-frame fusions. Characterizing important downstream target genes of MLL and of MLL fusion proteins may provide rational therapeutic strategies for the treatment of MLL-associated leukemia. ... More