Vybrant™ CFDA SE 细胞示踪剂试剂盒
Invitrogen17万+抗体限时买二赠一,靶点广,灵活用!
Vybrant™ CFDA SE 细胞示踪剂试剂盒
Invitrogen™

Vybrant™ CFDA SE 细胞示踪剂试剂盒

Vybrant™ CFDA SE 细胞示踪剂试剂盒用于在荧光分析中作为细胞的长期示踪剂。该方法通常用于细胞的体外和体内标记,以确定细胞是否正在增殖。•卓越的性能—允许对细胞进行明亮、均匀的染色• 保留时间长—染色后染料可在细胞中完好保留数天• 无毒—对体内和体外检测具有极小细胞毒性• 简单而可靠的染色方案卓越的荧光染色效果成功的细胞示踪需要极明亮的染料,以便区分荧光标记的细胞和自发荧光了解更多信息
Have Questions?
货号数量
V128831 Kit
货号 V12883
价格(CNY)
3,857.00
飞享价
Ends: 31-Dec-2025
5,126.00
共减 1,269.00 (25%)
1 kit
添加至购物车
数量:
1 Kit
价格(CNY)
3,857.00
飞享价
Ends: 31-Dec-2025
5,126.00
共减 1,269.00 (25%)
1 kit
添加至购物车
Vybrant™ CFDA SE 细胞示踪剂试剂盒用于在荧光分析中作为细胞的长期示踪剂。该方法通常用于细胞的体外和体内标记,以确定细胞是否正在增殖。

•卓越的性能—允许对细胞进行明亮、均匀的染色
• 保留时间长—染色后染料可在细胞中完好保留数天
• 无毒—对体内和体外检测具有极小细胞毒性
• 简单而可靠的染色方案

卓越的荧光染色效果
成功的细胞示踪需要极明亮的染料,以便区分荧光标记的细胞和自发荧光。Vybrant™ CFDA SE 细胞示踪剂试剂盒提供的强荧光染色使标记细胞在染色后数天仍然可见,这一点使其成为基于染料稀释的细胞示踪研究的理想染色剂。

信号保留时间长
Vybrant™ CFDA SE 染料可轻松穿过质膜,并在细胞内共价结合,稳定、保留良好的荧光染料设计用于在细胞内提供一致的信号,即使在细胞培养环境中数天后依然如此。

无毒
Vybrant™ CFDA SE 染料可共价结合细胞表面和细胞内的所有游离胺,细胞毒性极小,对细胞增殖能力或细胞生物学影响很小。研究人员已使用 CFDA SE 标记显示了可移植造血细胞在体外对生长因子混合物刺激的反应性增殖。

简单而可靠的染色方案
Vybrant™ CFDA SE 细胞示踪剂试剂盒含有便利的一次性使用样品瓶装染料粉末,可用于小规模实验,免于染料制备过量,从而延长了未溶于溶液的染料的有效期。使用前,用无水 DMSO 溶解小瓶内容物,制成储备液。对无蛋白培养基中的 1 mL 细胞染色,通常使用 1 µl 储备液。细胞在室温下染色 20 分钟,染色期间轻轻搅拌。随后,用完全培养基简单清洗一下,然后淬灭溶液中残余的染料。
仅供科研使用。不可用于诊断程序。
规格
检测方法荧光
染料类型CFDA SE (CFSE)
激发波长范围492⁄517
适用于(设备)荧光显微镜、流式细胞仪
形式固体
产品规格管、玻片
产品线Vybrant™
数量1 Kit
运输条件室温
溶解度DMSO(二甲亚砜)
标签类型其他标签或染料
产品类型CFDA SE 细胞示踪剂试剂盒
Unit Size1 kit
内容与储存
包含10个样品瓶的 5(6)-CFDA,SE(CFSE,每个样品瓶 500 μg)和1瓶 DMSO (1.3 mL)。 在冷冻冰箱(-5 至 -30°C)中储存。

常见问题解答 (FAQ)

我想用核酸染料来追踪我的细胞,比如DAPI或者Hoechst染料。您有什么建议吗?

这是不推荐的。这些染料与DNA和RNA的结合会影响核酸的正常功能,扰乱转录和增殖。诸如CellTracker染料或Qtracker试剂在不严重扰乱细胞正常活动的条件下对其进行追踪。如果您仍需要使用核酸染料进行标记且细胞是哺乳动物和非血液来源的话,CellLight 细胞核试剂可通过瞬时转染进入细胞,在核表达蛋白上表达GFP或RFP长达数天而不影响其功能。

我想追踪细胞,但贵司有很多产品可供选择,我该如何选择?

请浏览这里(https://www.thermofisher.com/us/en/home/life-science/cell-analysis/cell-tracing-tracking-and-morphology/cell-tracking.html)以帮助您选择适合您的应用的产品。首先确定追踪细胞的时间,然后考虑染料结合机制。钙黄绿素染料标记均匀且对短期细胞迁移示踪效果极佳,但也会被某些类型细胞迅速外排。亲脂性的花青素染料,如DiI,DIO,和类似的染料能标记细胞膜而不破坏其功能,并且能持续更长时间,但如果发生膜融合则可能会染上其他细胞。此外,它们还会在透化过程中丢失。CellTracker染料更有利于长期标记,其带有温和的氯甲基反应基团使之能够与细胞组分共价结合。CFDA SE也能共价地结合于细胞组分。在所有列出的试剂中,细胞内保留与否取决于细胞分裂的速率和细胞的固有特性(主动外排,膜和蛋白质的周转率等)。其中共价结合试剂比非共价结合的试剂展现出更长的保留时间。

Qtracker试剂是最持久并且荧光强度最高的细胞示踪染料,它通过内吞作用被细胞摄入。在许多样品中它们产生的信号可以持续检测长达数周,而且信号足够强,即使在固定和通透甚至加热和石蜡处理过程中,仍然能够维持较好的荧光信号。

I'm trying to label my cells in suspension and track them over time by labeling with CFDA SE, but after labeling them they will no longer adhere to a surface (whereas unlabeled cells adhere well). I've tried to label at 10 and 20 µM. What is causing this?

This dye will bind to proteins via primary amines. Too high of a concentration can lead to cell toxicity or unintended modification of cell function. The solution is to reduce the concentration and/or staining time, or to go with a non-protein-binding tracking reagent, such as Qtracker cell labeling reagents.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

I want to do a cell migration study for around 4 hours and need to fluorescently label the cells with a dye. What do you recommend?

Calcein, AM and FDA (fluorescein diaceate) are examples of some dyes used for this application. Since these dyes are not incorporated or covalently attached to any cellular components, they may have a short retention time as some cell types may actively efflux the dye out of the cells. The CellTracker and CellTrace dyes include either a mild thiol-reactive chloromethyl group or amine-reactive succinnimidyl ester group to allow for covalent binding to cellular components, providing for better retention. As with any reagent, one should empirically determine retention times for the cell type used.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.

I labeled my cells with Calcein, AM, but when I imaged the next day, there was no fluorescence from Calcein. Why?

Calcein, AM is a good choice for cell tracking and as a general cytoplasmic stain. However, it doesn't bind to anything and may be actively pumped out of the cells within a couple hours, which is likely what happened. The retention of Calcein within live cells is dependent upon the inherent properties of the cell type and culture conditions.

For long-term imaging, you may wish to consider a reactive cytoplasmic stains such as CFDA, SE or the CellTracker and CellTrace dyes.

Find additional tips, troubleshooting help, and resources within our Cell Analysis Support Center.