DS-33 GeneScan™ 安装标准品（随附 GeneScan™ 600 LIZ™ Size Standard v2.0荧光内标染料）

DS-33 GeneScan™ 安装标准品含有 6-FAM™、VIC™、NED™ 和 PET™ 染料标记的混合 PCR了解更多信息

货号	数量
4376911	1 kit

货号 4376911

价格（CNY)

8,403.00

添加至购物车

1 kit

价格（CNY)

8,403.00

添加至购物车

DS-33 GeneScan™ 安装标准品含有 6-FAM™、VIC™、NED™ 和 PET™ 染料标记的混合 PCR 产物。为生成混合产物，已使用8个荧光 PCR 引物对扩增 CEPH 个体 1347-02 基因组 DNA，该引物对扩增所选的微卫星序列基因座（如包装产品说明书中所示）。该试剂盒还包含一管 GeneScan™ 600 LIZ™ 上浆标准品2.0。

仅供科研使用。不得用于人或动物的治疗或诊断用途。

仅供科研使用。不可用于诊断程序。

适用于（设备）3730xl DNA 分析仪、SeqStudio 基因分析仪、3500 基因分析仪、3730 DNA 分析仪、3500xL 基因分析仪

标签或染料FAM、Liz、NED、PET、VIC

产品线GeneScan，LIZ

产品类型安装标准品

数量1 kit

运输条件干冰

测试时间标准

产品规格管装

Unit SizeEach

内容与储存

每个试剂盒含有四管 GeneScan™ 安装标准品 DS-33 和一管 GeneScan™ 600 LIZ™ 片段标准品 v2.0。
将 DS-33 管储存在 -25°C 至 -15°C 下
解冻后，将 GeneScan 600 LIZ 片段标准品 v2.0 避光储存在 2°C 至 8°C 下。

常见问题解答 (FAQ)

What does the SeqStudio Starter Kit (PN A35000) contain?

The SeqStudio Starter Kit (PN A35000) includes:
- SeqStudio Integrated Capillary Protector (Cat. No. A31923)
- SeqStudio Cathode Buffer Container (Cat. No. A33401)
- Sequencing Standard, BigDye Terminator v3.1, for 3500/SeqStudio Flex (Cat. No. 4404312)
- DS-33 GeneScan Installation Standards with GeneScan 600 LIZ Size Standard v2.0 (Cat. No. 4376911)
- Hi-Di Formamide (Cat. No. 4401457)
- MicroAmp Optical 96-Well Reaction Plate with Barcode (Cat. No. 4306737)
- MicroAmp 96-Well Tray/Retainer Set (Cat. No. 403081)
- MicroAmp Optical 8-Tube Strip, 0.2 mL (Cat. No. 4316567)
- Nuclease-Free Water (not DEPC-Treated) (Cat. No. AM9930)
- Cathode Buffer Container Reservoir Septa for SeqStudio Genetic Analyzer (Cat. No. A35640)
- 96-well Septa for SeqStudio Genetic Analyzer (Cat. No. A35641)
- 8-strip Septa for SeqStudio Genetic Analyzer (Cat. No. A35643)
- SeqStudio Cartridge v2 (PN A41328) (if this component is ordered online the catalog number is A41331)

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

When I started my run on the Applied Biosystems 3500/3500xL Genetic Analyzer, an error occurred: "Unstable Electrophoresis current detected, check for air bubbles" but I don't see any bubbles. What else can cause this?

Some of the other causes of an Unstable Electrophoresis current detected error message are:

1.Leak on the system
2. Polymer that:
-Has expired
-Has been left on the instrument for more than the recommended time
-Is a mixture of expired polymer and non-expired polymer
3. Running Buffer that was:
-On the instrument longer than 2 weeks
-Not filled to the fill line or evaporated below the fill line
4. An arcing event that was not cleaned afterwards using the water wash wizard
5. Not performing regular maintenance on the instrument
6. Hardware issues

Inspect the system for leaks. If you do not see any leaks on the system, perform the wash the pump chamber and channels wizard using the conditioning pouch and place fresh, non-expired polymer and fresh Anode and Cathode buffer containers. If the problem persists, a service call may be required.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.

Do I need to replace the buffer every 14 days if the Applied Biosystems 3500/3500xL Genetic Analyzer is not in use?

If the instrument is not in use, it is not necessary to replace the buffer every 14 days. However, the buffer level needs to remain at the fill line to prevent the capillary or array from drying out. Top off the buffer volume with water if necessary. Replace the anode and cathode buffer containers prior to starting a new run.

Find additional tips, troubleshooting help, and resources within our Capillary Electrophoresis Instruments Support Center.