GeneChip™ HT Pico 试剂盒
Product Image
Applied Biosystems™

GeneChip™ HT Pico 试剂盒

GeneChip™ HT Pico 试剂盒(HT Pico 试剂盒)是较灵活灵敏的自动化靶向制备试剂盒,用于从多种样品类型的少至 10 个细胞了解更多信息
Have Questions?
货号数量
9027911 kit
货号 902791
价格(CNY)
-
数量:
1 kit
GeneChip™ HT Pico 试剂盒(HT Pico 试剂盒)是较灵活灵敏的自动化靶向制备试剂盒,用于从多种样品类型的少至 10 个细胞(约 100 pg 总 RNA)中准确且精确地分析全基因组表达。*HT Pico 试剂盒可以制备样品并生成杂交用靶标,手动操作时间较少,适用于与基因水平表达阵列配合使用,例如传统 3' IVT、GeneChip Gene 1.0/1.1/2.0/2.1 ST 阵列和 Clariom™ S 阵列。设计在 Beckman Coulter™ Biomek™ FXP Target Prep Expression (TPE) 系统上使用,HT Pico 试剂盒可以在单次运行中处理多达 96 份样品。

适用于少量 RNA 的可扩展、灵活且自动化的样品制备
•节省珍贵的临床样品,使用少至 100 pg 总 RNA(约 10 个细胞),就可揭示小亚群细胞的生物学信息。*

•通过用于关键样品类型的工具包获得整体的灵活性:
   - 培养细胞
   - 新鲜/新鲜冷冻和福尔马林固定石蜡包埋 (FFPE) 组织
   - 全血
• 消除球蛋白 mRNA 或核糖体 RNA 降低的需要,以减少变异性并简化实验工作流程。
•Biomek FXP Target Prep Express 系统上进行自动化方案,可以较少的手动操作时间处理 24 或 96 份样品。
•使用表达阵列(例如 3' IVT、GeneChip 基因 ST 和 Clariom S 阵列)执行稳健的基因水平表达谱分析。

揭示不同样品中内含的生物学信息
传统的全基因组表达分析需要从相对大量的细胞样品中萃取 RNA。然而,从样品中获得的基因表达测量结果代表了平均值,有可能掩盖样品中细胞亚群之间的关键差异。为了更好地了解这些基因表达差异的生物学意义,研究人员越来越重视表征和细胞亚群分析。

现代技术,包括荧光激活细胞分选 (FACS) 和激光捕获显微切割 (LCM),可实现小细胞群的表征与随后分离。但是,由于细胞数量有限,这些样品通常无法提供足够的 RNA 以从微阵列或 RNA 测序获得稳定的表达数据。HT Pico 试剂盒专门开发用于自动处理输入的少量 RNA,让研究人员仅需使用各种样品类型的少量细胞,即可在表达阵列上执行稳健的基因水平分析。HT Pico 试剂盒使用逆转录引发方法,可在 poly-A 尾以及整个 RNA 长度范围内引发,从而确保无偏倚覆盖转录组。

使珍贵样品发挥较大价值
因为样品的独特性或除此之外的不可替代性,很多样品十分珍贵,例如来源于活检的样品。当处理每个珍贵样品时,研究人员必须尽可能保存大数量的样品,以供未来实验使用。利用 HT Pico 试剂盒,研究人员可以使用少至 100 pg 总 RNA 从微阵列生成稳健、可重现的全基因组表达数据,确保大部分样品留在未来使用。

处理多种样品类型
研究通常需要分析来自多种组织的样品。例如,癌症研究通常涉及新鲜冷冻组织和 FFPE 组织的样品比较。通常,有必要使用不同的试剂盒处理不同类型的样品,以增加实验工作流程的复杂性,并在数据中引入不必要的变异。HT Pico 试剂盒可用于处理基础和转化研究中使用的大多数样品类型,简化了实验流程并消除了不同靶标制备方法引起的差异性。

以极短的实操时间来扩大样品制备规模
此款高通量 (HT) 解决方案供用户以极短的实操时间从有限的 RNA 生成可用于杂交的靶标。与 Beckman Coulter Biomek FXP Target Prep Express (TPE) 系统上的优化方案配合使用时,HT Pico 试剂盒可在单次运行中处理多达96份样品。

*新鲜冷冻细胞或组织的总 RNA 的推荐量为 500 pg - 10 ng,福尔马林固定、石蜡包埋组织的总 RNA 的推荐量为 2 ng - 50 ng。
仅供科研使用。不可用于诊断程序。
规格
适用于(应用)转录组谱分析
产品线GeneChip
数量1 kit
试剂类型样品制备试剂
类型HT Pico 试剂盒
Unit SizeEach

常见问题解答 (FAQ)

What reagent kit should I use with my array?

Please refer to the Microarray Reagent Guide for Arrays and Expression Kits to match the correct reagents your array.

Find additional tips, troubleshooting help, and resources within our Microarray Analysis Support Center.

Where can I download the control sequences for expression arrays?

Sequences of all our controls can be downloaded from the sequence file that is available on product pages on thermofisher.com.

For example, here is the link to the product page for Clariom D Assay, human: https://www.thermofisher.com/order/catalog/product/902923
Go to the "Software & Data Analysis" section and under "Support Files", click on "Sequence Files: Clariom D Array, human Probe Sequences, tabular format", which you can open in Excel.

Note: If the control sequence file is not available, please contact techsupport@thermofisher.com.

Are pseudogene databases included in the design of expression arrays?

Pseudogene databases were not included in the design of expression arrays.

How long can I store labeled cDNA when working with expression microarrays?

Labeled material can be stored for 2 weeks at -20 degrees C.

What is the shelf life for expression microarrays?

Typical shelf life for expression arrays are as follows:
- All ≥ 8 µm commercial expression cartridges are stable up to 24 months.
- All ≥ 8 µm commercial resequencing cartridges are stable up to 18 months.
- All ≥ 8 µm commercial expression plates are stable up to 18 months.

Please note that this excludes products such as Exon or Gene array as they are 5 µm cartridge and plates.