Neon™ NxT Electroporation System 1-Channel Tubes
Neon™ NxT Electroporation System 1-Channel Tubes
Invitrogen™

Neon™ NxT Electroporation System 1-Channel Tubes

Neon NxT Electroporation System 1-Channel Tubes are designed specifically for use with the Neon NxT Electroporation System with 1-Channel Pipette.
Have Questions?
更改视图buttonViewtableView
货号数量
NT9696 tubes, 96 tubes
NT2424 Tubes, 24 Tubes
货号 NT96
价格（CNY)
8,308.00
Each
添加至购物车
数量:
96 tubes, 96 tubes
价格（CNY)
8,308.00
Each
添加至购物车

Neon NxT Electroporation System 1-Channel Tubes are designed specifically for use with the Neon NxT Electroporation System with 1-Channel Pipette (Cat. Nos. NEON1S, NEON1SK, NEON18S, NEON18SK). Each Neon NxT Electroporation System Kit for 25 x 2 reactions (Cat. Nos. N1025 and N10025) comes with eight 1-channel tubes, and each Neon NxT Electroporation System Kit with 1-Channel Tubes for 96 x 2 reactions (Cat. Nos. N1096 and N10096) comes with 32 1-channel tubes. This pack of additional tubes is offered for those wishing to use single tubes per reaction depending on their experimental setup or for reactions with the 1-channel pipette when predominately using the 8-channel pipette and utilizing kits that contain the 8-channel tubes.

仅供科研使用。不可用于诊断程序。
规格
适用于（应用）转染
适用于（设备）Neon™ NxT Electroporation System
数量96 tubes, 96 tubes
细胞类型Stem Cells, Primary Cells, Hard-to-Transfect Cells
适用于（应用）电穿孔
适用于（设备）Neon™ NxT Electroporation System
产品规格Electroporation Pipette Tip
转染技术电穿孔
Unit SizeEach

常见问题解答 (FAQ)

How are the Neon NxT Electroporation System 1-Channel Tubes (Cat. No. NT24 and NT96) packaged?

The tubes are packaged in groups of 4. Therefore, Cat. No. NT24 will have 6 bags of 4 tubes and Cat. No. NT96 will have 24 bags of 4 tubes.

Find additional tips, troubleshooting help, and resources within our Transfection Support Center.

What state should the cells be in for best results with the Neon Nxt Electoporation System?

For best results with the Neon Nxt Electoporation System, the cells should be healthy (not stressed) and actively dividing so that the nuclear membrane integrity is already weakened for payload needing to enter the nucleus. Consider “starving” the cells of serum or other essential nutrients.

Find additional tips, troubleshooting help, and resources within our Transfection Support Center.

I'm experiencing arcing issues with the Neon Nxt Electoporation System. What could be causing this?

Arcing could be caused by high voltage or pulse length settings, high salt or contaminants in the DNA sample, incorrect cell density, and air bubbles formed during mixing of cell samples. Mix samples gently to avoid air bubble formation and pipette samples in a slow, smooth motion to avoid air uptake.

Find additional tips, troubleshooting help, and resources within our Transfection Support Center.

After electroporation using the Neon NxT Electroporation System, how long should I wait before analyzing protein expression?

The optimal time for analysis of protein expression is dependent upon the stability of the protein being expressed. For a short-lived protein, like luciferase, analysis of protein expression should be done at 6-18 hours after electroporation. For a more stable protein, such as GFP, you should start the analysis at 24 hours or longer post-electroporation.

Find additional tips, troubleshooting help, and resources within our Transfection Support Center.

What is the best time for analysis of CRISPR/Cas9-based KO/KI application in T cells after electroporation using the Neon NxT Electroporation System?

We recommend analyzing the cells 72 hours post-electroporation.

Find additional tips, troubleshooting help, and resources within our Transfection Support Center.

View all Neon™ NxT Electroporation System 1-Channel Tubes FAQs