ZOOM™ CHAPS
ZOOM™ CHAPS
ZOOM™ CHAPS
ZOOM™ CHAPS
Invitrogen™

ZOOM™ CHAPS

ZOOM™ IEF 分馏器可快速可靠地降低样品复杂性,富集低丰度蛋白并扩大检测的动态范围。使用 ZOOM™ IEF 分馏器进行的溶液相等电聚焦可在 3 小时内实现可重现的分离。通过二维凝胶电泳了解更多信息
Have Questions?
货号数量
ZC100035 g
货号 ZC10003
价格(CNY)
3,003.00
5 g
添加至购物车
数量:
5 g
价格(CNY)
3,003.00
5 g
添加至购物车
ZOOM™ IEF 分馏器可快速可靠地降低样品复杂性,富集低丰度蛋白并扩大检测的动态范围。使用 ZOOM™ IEF 分馏器进行的溶液相等电聚焦可在 3 小时内实现可重现的分离。通过二维凝胶电泳 (2DE)、一维凝胶电泳 (1DE) 或二维液相色谱/质谱 (2D LC/MS) 可对已分离的样品进行进一步分析。

ZOOM™ IEF 组分分离器系统(图 1)包括以下组成部分:

ZOOM™ IEF 分馏器专为安全性、可靠性和耐用性而设计。该分馏器包括易于组装的样品室、内置缓冲液室、缓冲液洗槽、可拆卸电极组件和安全盖。
ZOOM™ 圆盘为丙烯酰胺预制胶,无需手动制备,可较大限度减少交叉污染概率。这些固定化缓冲盘是预先标记的一次性耗材,设计供单次使用,可确保实现一致且可重现的分离。它们可在 pH 值 3–12 的范围内将样品解析为 7 个组分(使用 8 个具有特定 pH 值的圆盘)至 6 个组分(使用 6 个具有特定 pH 值的圆盘)。只需将每个盘置于 ZOOM™ IEF 组分分离器中的样品室之间,即可在特定 pH 值范围内进行分离。
ZOOM™ 试剂是蛋白质组学级试剂,包括 ZOOM™ 2D 蛋白增溶剂尿素、硫脲、CHAPS 和两性电解质,确保极佳样品制备条件。
碱性蛋白试剂盒包括用于碱性蛋白等电聚焦的 ZOOM™ 圆盘和 ZOOM 胶条,以及聚焦缓冲液和增溶剂试剂盒。

样品室和分馏器单元设置程序
图 4–6 显示了样品室和分馏器单元的组装结构。样品室和组件可轻松配合使用,并提供防漏密封。只需将圆盘放置在 ZOOM™ IEF 分馏器的样品室之间,即可在特定 pH 值范围内进行分离。例如,如果您想在 pH 值 4.6-5.4 的范围内分离蛋白质,则分别在样品室的两侧放置一个 pH 值 4.6 和 pH 值 5.4 的 ZOOM™ 圆盘。

通过 2D 凝胶电泳进行下游处理
分馏后,可使用 ZOOM™ IPGRunner™ 系统上的窄范围或宽范围 ZOOM™ 胶条对分离所得样品进行进一步分析。然后使用中性 pH NuPAGE™ ZOOM™ 凝胶进行二维分析。
仅供科研使用。不可用于诊断程序。
规格
产品规格粉末
数量5 g
运输条件室温
产品线ZOOM
产品类型ZOOM™ 试剂
Unit Size5 g
内容与储存
ZOOM™ IEF 分馏器组合试剂盒包括 ZOOM™ IEF 分馏器;一套 ZOOM™ 圆盘(包含每种 pH 值);以及 ZOOM™ 试剂(尿素、硫脲、CHAPS、pH 值为3-10的载体两性电解质、阳极缓冲液和阴极缓冲液)。ZOOM™ 圆盘、载体两性电解质和缓冲液应储存于 +4°C。

常见问题解答 (FAQ)

你们是否提供用于蛋白质凝胶染色的染色盘(staining trays)?

我们提供以下蛋白质凝胶染色盘:

•StainEase 染色盘(货号NI2400)可用于对小型和中型凝胶进行方便、均匀的染色。该染色盘组件包括一个用于放置凝胶和排出染料的多孔滤管嵌件、一个盖子以及不必操作凝胶即可在其中更换染料和溶液的外部容器。可轻松安装最多4块小型凝胶。
•小型凝胶孵育盘(货号22843)可用于小型凝胶和蛋白免疫印迹膜的染色。

What are the components of the ZOOM IEF Fractionator?

The ZOOM IEF Fractionator includes the following components:

Chamber Assembly Tube with Anode Reservoir
Spill Trough with Cathode Reservoir Lid
Sample Chambers (7)
Sample Chamber O-ring Seals, red (10)
Sample Chamber Caps with O-rings (7)
Cathode End Sealer
Anode End Sealer
Cathode End Screw Cap
Spacers, black (8)
Spares Box 1
Sample Chamber O-ring Seals (8)
Sample Chamber Caps with O-rings (7)
Spares Box 2
Cathode Chamber Seals (2)
Spacers, black (8)

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

Can I heat my protein sample prepared using ZOOM 2D Protein Solubilizer?

We do not recommend heating protein samples containing urea over 37 degrees C as elevated temperatures cause urea to hydrolyze to isocyanate, which modifies proteins by carbamylation.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How do you recommend storing protein samples prepared in the Sample Rehydration buffer?

We recommend storing them at -80 degrees C. We do not recommend storing them at -20 degrees C

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.

How much ampholyte do you recommend adding to the sample rehydration buffer?

The recommended ampholyte concentration in the sample rehydration buffer is 0.5%.

*If you are loading 5-50 µg of protein (pure protein or crude lysate) per ZOOM strip, use 0.5% ampholytes in the sample rehydration buffer.
*If you are loading >50 µg of protein (crude lysate or fractionated sample) per ZOOM Strip, use 0.5-2% ampholytes in the sample rehydration buffer.

Note: Higher ampholyte concentration requires longer focusing times.

Find additional tips, troubleshooting help, and resources within our Protein Electrophoresis and Western Blotting Support Center.